Anti corrosive heart resistance SS PTFE bellows

Payment Type:T/T

Incoterm:FOB,CIF,EXW

Transportation:Ocean,Air

Port:Shanghai,Zhenjiang,Nanjing

Product Attributes
Supply Ability & Additional Information
Packaging & Delivery
Other information

Product Attributes

Brand: Rayhot

Any Size Can Be Customized: any size can be customized

Supply Ability & Additional Information

Packaging: Carton Packing and wooden box package

Transportation: Ocean,Air

Place of Origin: China

Port: Shanghai,Zhenjiang,Nanjing

Payment Type: T/T

Incoterm: FOB,CIF,EXW

Packaging & Delivery

Selling Units:

Others

Package Type:

Carton Packing and wooden box package

Picture Example:



producing department of PTFE products



chemical resistant PTFE rod,PTFE sheet,PTFE bar,PT



PTFE SHEET ROD BELLOWS PRUDUCING PROCESS



1. Mixing: Select raw materials, colorants, high-temperature resistant agents, and flame retardants according to the formula requirements, and stir in the mixer for 5-7 minutes to evenly mix the materials and accessories. (Note: do not mix in other impurities)

Ptfe Butterfly Valve

2. Extrusion: Select the extrusion mold, heat it up, and adjust the temperature according to the material. Clean the machine and wash off the leftover material from the last extrusion. (Ensure that there are no other impurities in materials of different colors or other materials) Adjust the mold and ensure there is no bias. (When adjusting the bias, the adjustment amplitude should not be too large, and the force should be moderate, especially for thin-walled pipes) (self-extinguishing pipes)

Corrosion Resistant Ptfe Bend

3. Forming: Select the mold and pay attention to the direction when installing the mold. Choose guide pins and suitable air plugs to ensure that there is no air leakage during the forming process and that the air plugs do not scrape the inner wall of the pipe. Adjust the appropriate air pressure according to the shape of the pipe.

4. Winding: Adjust the meter according to the requirements, and the reel will automatically stop after an alarm. Tie and wind the pipe.

PTFE Lined Elbow

5. Packaging: For the inner packaging, use wrapping film to wrap the finished product completely, and be careful not to tie it too tightly, which may deform the product. For the secondary packaging, use kraft paper to wrap it to ensure full coverage. For the outer packaging, tightly wrap it with tape and pack it in a snake skin bag.